Product Information And Operation; Indications For Use; Procedure - Dentmate LEDEX WL-070 Manuel D'utilisation

2. Product Information and Operation

The light of the product is super-high luminosity LED. The light wavelength is
between 440 and 480 nm, and the light intensity is from 1000 to 1200 mw/cm².
These characteristics enable the light to polymerize almost all photosensitive
composite resins.
TM
LEDEX WL-070 dental curing light is characterized as followed:
• The light guide rod is made from genuine optical fiber minimizes loss of light from
source to tip. It ensures the highest possible intensity of light at the light guide
tip.
• Advanced and high efficient cooling heat sink designed accompany with over
temperature protection. A thermal protection circuit and safety mode are also
designed to prevent the light from overheating.
• The automatic memorization of the last operation chosen is another unique
feature of the light.
• Cordless / cord combo gives the operator flexability to use. Operator can use
with or without the charging cord plug-in.
• Automatic sleep mode saves battery and extends usage time.

2.1. Indications for use

LEDEX WL-070 is a visible curing unit designed for polymerization of dental light
cured materials used only by dental professionals.

2.2. Procedure

Please follow the insturction before use. As for handpiece instuctions, please refer
to 2.6-2.9. It is required to use the disposable sleeves to prevent cross infection.
Put the sleeve and cover the handpiece before operation. After conducting a
sugery on a patient, please take off the sleeve and throw away, as the sleeve is
prohibited to reuse.
2