Warnings; User; Ambient Conditions - Dentmate LEDEX WL-070 Manuel D'utilisation

Table des Matières

Publicité

4. Warnings

4.1. User

The handpiece is intended for the polymerization of light-cured
materials and is used only by trained and qualified professionals,
such as dentists.

4.2. Ambient conditions

Do not place the device in humid surroundings or any places
which are close to any liquids.
Do not expose the device to any heat sources. Store the device in
a safe environment.
• The device could be operated up to a maximum temperature of
35 °C and up to an altitude of 2,000 m above sea level.
• Do not use the device in the presence of free oxygen,
anesthetics or flammable substances.
• The device may interference or interfere with the radio or the
operation of the equipment nearby. If this happens, reduce
the interference by reorienting and repositioning the device or
screening off the immediate environment. The electromagnetic
radiation emitted from this device is below the recommended
limits specified by the applicable relevant provisions(EN 60601-
1-2:2007 & EN 60601-1:2006).
• The device requires special precautions with regard to
electromagnetic compatibility (EMC) and it must be installed
and operated in strict compliance with the EMC information.
Especially, do not use the device in the vicinity of fluorescent
lamps, radio transmitters, remote controls, portable or mobile
RF communication devices, even if they meet CISPR 8
requirements.
• D o n o t c h a r g e , o p e r a t e o r s t o r e t h e d e v i c e a t h i g h
temperatures. Comply it with the specified operating and
storage conditions.
9

Publicité

Table des Matières
loading

Produits Connexes pour Dentmate LEDEX WL-070

Table des Matières