To Avoid Electric Shock(Shock Hazard); Heat Development (Burn Hazard); Battery - Dentmate LEDEX WL-070 Manuel D'utilisation

10

4.3. To avoid electric shock(shock hazard)

TM
The LEDEX WL-070 Dental Curing Light is an electric device
designed to meet the worldwide electrical safety standards, which
includes U.S.A and Europe, so it's safe and effective for all dental
applications.
To avoid electric shock:
• Do not attempt to open or alter the unit in any way. Only the
service centers authorized by DENTMATE can open the unit
housing and repair the device.
• Do not put any foreign objects into the housing of the unit.
• Use only the LEDEX
this product. Never attempt to use any other devices for
recharging.
• Connect the power plug into a suitably grounded and approved
outlet. When you use an extend cable, make sure the grounded
line is not interrupted.
• Always unplug the charging dock before disinfecting.
• Never use the power supply if the cord has been damaged.

4.4. Heat development (burn hazard)

As it is the case with all high-performance lights, the high light
intensity results in a certain heat development. Prolonged
exposure near the pulp and soft tissues may result in irreversible
or reversible damage. Therefore,this high-performance curing light
must be operated by trained professionals.
Note : At least 10 mm gap between soft tissues and optical fiber
light guide rod.

4.5. Battery

Use only original spare parts, particularly DENTMATE batteries
and charging bases. Do not short circuit battery. Do not store at
temperatures above 40 °C / 104 °F(or 60 °C / 140 °F for a short
period). Always store batteries charged. The storage period must
not exceed 6 months. It may explode if it's disposed of in fire.
TM
WL-070 power supply when recharging