Steps To Take Blood Pressure Measurement - Inovalley 0098-N Mode D'emploi

8-3. Steps to take blood pressure measurement:

A. Wrap the cuff around the wrist (Refer to Attaching Pressure
Cuff as Figure No. 6)
B. Sit upright on the chair to have correct
posture (Refer to Correct Measurement
Position as Figure No. 7)
C. Press "▲" or "▼" button to select a
particular number.
Press "MARCHE/ARRET" button to start
measurement. The monitor will automatically
inflate to the level that is right for you.
* When taking repeat measurements, make sure to select the same
particular number before pressing "MARCHE/ARRET" button so
that the measurement is registered to the appropriate memory.
*Note!
● Do not move or talk during measurement.
D. After the air pressure is increased, it will slowly be decreased.
When the pulse rate is detected, POULS symbol
flashing.
E. After taking blood pressure measurement,
the systolic rate, diastolic rate will be on
the display for 1 minute; and then the
device will automatically go to standby
mode if without any operation.
13
will start