How To Measure; Inserting Batteries In Position; Setting Date And Time - Inovalley 0098-N Mode D'emploi

8. How to Measure

8-1. Inserting batteries in position:

A. Open battery cover.
B. Refer to the picture in positioning batteries. (Figure No.5)
C. All segments will
appear on the display
in 3 seconds.
D. Display 1month 1 date,
12 hour 0 minute.

8-2. Setting Date and Time:

A. Press "MODE" button ("month" starts flashing)
Press "▲" or "▼" button to set the correct month (1, 2, 3,.....12)
B. Press "MODE" button again ("date" starts flashing)
Press "▲" or "▼" button to set the correct date
C. Press "MODE" button again ("hour" starts flashing)
Press "▲" or "▼" button to set the correct hour in 12-hour
format
D. Press "MODE" button again ("minute" starts flashing)
Press "▲" or "▼" button to set the correct minute (0,1,2,3,.....59)
E. Press "MODE" button again to switch to normal time
(month, date, hour and minute appear on the display)
F. Device is ready to start measurement.
12