Before Using Your Fridge; The Various Function And Possibilities; Thermostat Setting - VESTEL VFKW6085 Guide D'utilisation

Before Using your Fridge

• When using your fridge for the first time, or after transportation, keep
it in an upright position for at least 3 hours before plugging into the
mains. This allows efficient operation and prevents damage to the
compressor.
• Your fridge may have a smell when it is operated for the first time. This is normal and
the smell will fade away when your fridge starts to cool.

THE VARIOUS FUNCTION AND POSSIBILITIES

PART- 2.

Thermostat Setting

The thermostat automatically regulates the inside temperature of the refrigerator. By rotating
the knob from position 1 to 5 colder temperatures can be obtained.
Important note: Do not try to rotate the knob beyond the 1 position, as it will stop your
appliance.
• For short-term storage of food in the fridge set the knob between the minimum and
medium position (1-3).
• For long-term storage of food in the fridge set the knob to a medium position (3-4).
Note: The ambient temperature, temperature of the freshly stored food and how often
the door is opened, all affect the temperature in the fridge. If required, change the
temperature setting.
• When you first switch on the appliance, allow it to operate for 24 hours continuously
to cool down to the correct temperature.
• During this initial 24 hour period do not open the door or place a lot of food inside the
appliance.
• If the appliance is switched off or unplugged, wait at least 5 minutes before plugging
the appliance in or restarting it in order not to damage the compressor.
• The freezer compartment of this refrigerator can cool to -12°C.
• Larders (coolers) do not have a freezer compartment but can cool to 4-6°C.
EN - 22 -