Alecto BW-700 Mode D'emploi page 18

6. Now within 5 seconds, use the M button to select:
7. Use the or
perature;
food from the fridge.
8. 5 seconds after making your selection the heating
element of the bottle warmer will switch on while the
display starts counting down to 0.
9. When the warm-up time is finished, 5 beeps are
emitted and the bottle warmer will switch itself off.
10. Remove the bottle/jar from the bottle warmer and shake the milk or stir the
food to ensure an even temperature.
11. First check the temperature of the food with the back of your hand before fee-
ding your baby, to ensure the food is at a temperature that's safe for your baby.
• If the temperature is too low, briefly put the bottle or jar back into the warm
water of the bottle warmer. You don't have to switch the device on again.
The water will still be warm enough. The next time you may want to pour
some more water into the bottle warmer.
• If the temperature is too high, let the milk or food cool down and the next
time pour a little less water into the bottle warmer.
To defrost:
1. Place the bottle warmer on a stable surface, out of reach of children.
2. Place the jar or bottle with the frozen food into the bottle warmer.
3. Fill up the space between the bottle warmer and the bottle or jar
with tap water at room temperature. Fill with water until you reach
the same level as the milk or food in the jar. When filling, never
exceed the maximum mark indicated.
4. Insert the plug into a 230Volts wall socket.
5. Press the
6. Now within 5 seconds, use the M button to select
7. 5 seconds after making your selection the heating
element of the bottle warmer will switch on while the
display starts counting down to 0.
8. After the 20 minutes defrosting time, 5 beeps are
emitted and the bottle warmer switches itself off.
To sterilize pacifiers:
1. Place the bottle warmer on a stable surface, out of reach of
children.
2. Pour 65ml of water into the bottle warmer. (see the short marking
mark)
3. Put the pacifiers you'd like to sterilize down into the bottle warmer.
4. Place the steam cover onto the bottle warmer to both keep the
heat inside and to prevent hot splashes from harming you.
button to select the starting tem-
for food at room temperature or
button to switch on the bottle warmer.
for
18
max