Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Why is there water in the
detergent dispenser?
Why can't I open the hatch
immediately after the wash
has finished?
Why doesn't the remaining
time shown on the clock
coincide with the real time
left until the selected cycle
finishes?
Additional Codes
safety and troubleshooting
This may be because the dispenser needs cleaning. This
simple operation is described in Maintaining and cleaning
the appliance.
1- Cleaning the detergent dispenser.
This washing machine is equipped with a safety system
that locks the hatch for two minutes after the wash cycle
is complete. This allows the unit to drain properly.
This time is for guidance purposes only and may be affected
by the conditions under which the selected program is being
run. For example: initial water temperature, size of load or,
an unbalance caused by garments during spin drying.
The washing machine may display other codes that
indicate operational issues. When other indicators appear
on the display such as: F05, F06..., F10.
Please call Technical Service.
24
Publicité
Table des Matières
