Remote Control Installation; First Operation - Blaupunkt CDC-FM 08 Notice D'emploi Et De Montage

Remote control installation

The remote control does not necessarily
have to be firmly attached to the passenger
compartment of the vehicle. For example,
you may fix it using a self-adhesive hook-
and-loop fabric fastener as illustrated in fi-
gure 1.
• Find a suited mounting location for the
remote control unit. It should be conve-
niently accessible from the driver seat.
• Attach it so that it cannot slip.
• Route the remote control cable to the
modulator.
• Connect the 6-pole cable connector
with the modulator.
• Re-connect the battery terminal after
having completed all installation and
connection work.
16
Fig. 1
Possible installation of the remote control using
self-adhesive hook-and-loop fabric fastener
tape.

First operation

Re-establish all electrical connections after
having completed all installation and connec-
tion work.
• Press to switch on the CDC-FM 08.
Now use a pencil or ball pen to press
the reset button on the back of the re-
mote control.
Note: Press the reset button briefly when-
ever a malfunction occurs.
• Tune your car radio into the frequency
selected before on the modulator. To
adjust the frequency, follow the opera-
ting instructions of the radio equip-
ment.
Note: If you would like to adjust the frequen-
cy by seek tuning, start CD playback first
(see "Starting CD playback").
• We recommend to store the selected
frequency on one of the preset buttons.
For this, please read the information in
your car radio user manual.