Transport - EIBENSTOCK DSS 25 A Notice Originale

Insert the closing plug of the vacuum cleaner into the suctionaperture (DSS
35 M iP).
The motor head must be securely fixed to the container (close the latches).
Place the accessories in a suitable plastic bag and seal the plastic bag or
place it in the tool storage compartment.
Plug the ends of the suction hose into each other.
Tests and approvals
Electro-technical tests need to be performed in accordance with the accident
prevention guidelines (BGV A3) and in accordance with DIN VDE 0701 Part
1 and Part 3. These tests need to be performed in regular intervals in
accordance with DIN VDE 0702 and after maintenance work or
modifications.
At least once a year, a technical dust inspection needs to be performed by
the manufacturer or a qualified person, e.g. to check for damage to the filter,
leaks, function of the control equipment.
The suction units are passed succesfull tested in accordance with IEC/EN
60335-2-69.
Environmental Protection
Raw material recycling instead of waste disposal
To avoid damages on transportation, the power tool has to be delivered in a
sturdy packing. Packaging as well as unit and accessories are made of
recyclable materials and can be disposed accordingly.
The tool's plastic components are marked according to their material,
which makes
differentiated because of available collection facilities.

Transport

it possible to
Only for EU countries
Do not dispose of electric tools together with household
waste material!
In observance of the European Directive 2012/19/EU on
waste electrical and electronic equipment and its
implementation in accordance with national law, electric
tools that have reached the end of their life must be
collected separately and returned to an environmentally
compatible recycling facility.
remove environmental
27
friendly and