Electrical Data - Fema DWR Série Instructions De Montage Et De Service

7.2

Electrical data

Connection plan
The terminal board can be accessed after the protective casing has been removed. After connecting
the supply lines, the protective casing should in all cases be reattached.
With increasing pressure 3–1 will be interrupted
and 3–2 will be closed.
Switching element
Single-poled, changeover microswitch.
Protection of the conductive connection
Can be accessed after removing the terminal board casing.
Earthing connection/potential connection
The maximal cross section of the cable is 4 mm
Switching power
3 A 250 V AC, 2 A 250 V AC (inductive)
0.03 A 250 V DC, 3 A 24 V DC
7.3 Pressure connection as for 1.3
2
.
40