QEO Selection PRO FL 66-Xtreme SP Mode D'emploi page 19

EN
NOTE: During transport the ON/OFF knob (compensator clamp) must be set to
„OFF" . Disregard may lead to damages of the compensator.
MANUAL FUNCTION)
The instrument is powerd off (OFF position).
Press the button MANUAL FUNCTION to enter into the MANUAL function. The
MANUAL LED is illuminated. Now the required laser lines can be switched and
the instrument can be used in slope position.
USE WITH RECEIVER
To extend the working range or for use in unfavourable light conditions the Laser
can be used with receiver FR 55 / FR 55-M.
The receivers are optional.
Press button (6) (pulse mode LED (7) will illuminate) to change from normal
to receiver mode. The receiver can now detect the laser lines (the visibility of the
laser lines are weaker in this mode).
By using a receiver the working range can be extended up to 80 m
(FL 66-Xtreme SP) or 100 m (FLG 66-Xtreme GREEN SP).
You will find more detailed information in the receiver user manual.
19