Set Up The Instrument - QEO Selection PRO FL 66-Xtreme SP Mode D'emploi

EN
E

SET UP THE INSTRUMENT

1. On a tripod: Connect the laser the to 5/8" retaining bolt of builder's tripod.
2. On the floor: Set up the laser on the floor tripod.
Set up the instrument as upright as possible by means of the circular vial of the
keypad to allow the self-levelling system to function within the range.
Fine adjustment with adjustable tripod legs.
FINE ADJUSTMENT SCREW
The laser can be rotated by hand or carefully by use of the tangent screw.
17