8. USING THE COMPUTER
TROUBLESHOOTING - PROBLEMS WITH THE COMPUTER DISPLAY
Error
Cause
message
Connection error
between computer
E01
board and motor
control board.
Error on motor
E02
binding of relay.
Error on speed
E03
sensor line.
Error on incline
E04
function.
E05
Over current
SP-TM-4220E-IM-05-DE+GB+FR.indb 63
Solution
Check if the cables
between computer
board and motor
control board are well
connected.
Check if the cables are
well connected to the
motor or not.
Check if the speed
sensor cable is well
connected or not.
Check if the position of
the sensor is correct or
not.
Check if the signal wire
and the AC single line
of the incline motor are
well connected or not.
Check if the walking belt
is stuck or stopped by
something.
Check the loading.
63
Further action
Replace the connecting
cable.
Replace the computer
board.
Replace the transformer.
Replace the motor.
Replace the motor
control board.
Replace the speed
sensor cable.
Replace the sensor.
Replace the motor
control board.
Replace the incline cable.
Replace the incline
motor.
Replace the motor
control board.
Apply small amount of
lubricant provided on the
running deck.
Replace the motor.
Replace the motor
control board.
15/6/2016 18:46