Princess 01.359000.01.001 Mode D'emploi page 5

Continuous Drainage
• When you plan to leave this unit unused for a long time, please remove
the rubber blockage from the drainage hole at the bottom of unit, and
connect a drain hose to the lower fixing clip. All the water in the water
tank will drain outside.
• If water pump is damaged, continuous drainage can be used, and
under this condition, the water pump is not activated. The unit can also
work well.
• If water pump is damaged, intermittent drainage can also be used.
Under this condition, when the water full indicator lamp lights up,
please connect a drain hose to the lower fixing clip.
Internal Tank Water Full Alarm Function
The inner water tank in the air-conditioner has one water level safety
switches, it controls water level. When water level reaches an anticipated
height, the water full indicator lamp lights up. (If water pump is damaged,
when the water is full, please remove the rubber blockage at the bottom
of unit, and all water will drain outside.)
INSTALLATION
• A removal air-conditioner shall be installed in the flat and empty place
all around. Don't block the air outlet, and the required distance around
should be at least 30cm.
• Socket wiring should be in accordance with the local electric safety
requirements.
Exhaust Hose Installation
•
EN
5