Table Des Matières - SKF TMSU 1 Mode D'emploi

Table of contents
Safety recommendations ..........................................................................................4
EC Declaration of conformity ....................................................................................5
1. Introduction .....................................................................................................6
1.1 Intended use . .................................................................................................................. 6
1.2 Principle of operation . ................................................................................................... 6
1.3 Distinguishing features ................................................................................................. 6
2. Description .......................................................................................................7
2.1 Components ................................................................................................................... 7
3. Technical data ..................................................................................................7
4. Operation .........................................................................................................8
4.1 Non-continuous operation . .......................................................................................... 8
4.2 Continuous operation . ................................................................................................... 8
5. Remarks ..........................................................................................................9
6. Spare parts ......................................................................................................9
• Do not expose the equipment to rough handling or heavy impacts.
• Always read and follow the operating instructions.
• Opening the housing of the instrument may result in hazardous
mishandling and voids warranty.
• The equipment should not be used in areas where there is a risk for explosion.
• Do not expose the equipment to high humidity or direct contact with water.
• All repair work should be performed by an SKF repair shop.
• Using any other headset than the one supplied with the instrument can
cause internal damage to the detector.
4
Safety recommendations
Original instructions
SKF TMSU 1