Publicité
Les langues disponibles
Les langues disponibles
EN
- Before starting with the installation check
whether the delivery is complete. At the
same time the delivery should be checked
for damage due to transportation, damage
reports that are too late (> 1 day after
delivery) will not be accepted.
- Only use soft fabric to clean the taps, no
acidic or alkalescent products should be
used for cleaning.
- Cartridge and diverter are tested in the
factory, no self assembly and disassembly
allowed.
- The exchange of cold water pipe and hot
water pipe is not allowed.
- When the roomtemperature is below 0˚C,
please close the water angle valve, open
the tap and let the water flow out
completely. This to avoid the tap breaking
during freezing period, and water leaking
when temperature rises.
- Water inlet pipes must be cleaned before
the installation of the tap, impurities could
damage the cartridge, diverter and
aereator.
- To avoid scale always turn on cold water
first before adjusting to the desired
temperature.
- Clou reserves the right to introduce
technical and visual changes with respect
to the depicted images.
- Due to changes in production it is possible
that given dimensions are no longer
correct. All mentioned dimensions in this
manual should be verified before executing
the action.
- Clou b.v. can not be held responsible for
the results of improper use, improper
transportation or any damage caused
during interim storage.
- The current terms of guarantee are always
valid.
- The installation has to be performed by at
least 2 persons of whom at least one
should be a skilled professional.
- Gloves should be wared during installation
of the tap.
- all dimensions are in mm.
- If the water flow is not enough, please
make sure the angle valves are opened.
- If the water flow is not regularly shaped,
please make sure the aereator is cleaned.
Publicité
