HumanTechnik A-4966-0 Mode D'emploi page 10

Rechargeable batteries
The charger comes with 2 NiMH rechargeable batteries. If the
rechargeable batteries are properly charged and discharged, they
will have a long service life.
Please make sure that the batteries are inserted correctly in the
battery compartment of the portable receiver. The illustration on
the bottom of the battery compartment indicates the correct di-
rection.
Please note that the rechargeable batteries are not charged on
delivery and must be completely charged (at least 10 hours) in
the portable receiver in the charger first.
To recharge your portable receiver, please use only the rechar-
geable batteries included with the charger or the rechargeable
replacement batteries (A-4966-0).
Charging the pager
Insert the pager in the charging bay. LED 2 will light up red when
the pager is inserted. An LED on the pager indicates when it is
fully charged.
LED 2 remains red as long as there is a pager present.
Sockets for vibrating pads and modules
There are two connector sockets marked VIB on the back of the
recharging base. It is possible to connect up to two vibrating pads
or other Humantechnik modules with the base.
When the portable receiver is placed in the charging dock, any in-
coming signal will be relayed to the connected accessories, which
will then react accordingly.
10 English