Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Oven Lamp Replacement
1. Switch off and disconnect the power from the ov en.
Ensure t hat the inter nal parts are cool before touching
internal parts.
2. Remove the lamp cover by turning it counter-
clockwise (note, it may be stiff), remove the bulb by
turning it counter-clockwise.
3. Insert the new bulb, which should be resistant to 300ºC.
For replacement bulbs contact your local service centre.
4. Re-fit the cover.
5. If in any doubt, consult a qualified electrician for help.
WARNING: To avoid electric shocks - please ensure
that the electricity supply to the appliance is
switched off and the appliance is fully cold, before
removing the lamp lens.
Latch
EN-24
Publicité
Table des Matières
