Stopwatch - switel WTC 516 Mode D'emploi

Operating the Walkie−Talkies
There are three sensitivity levels available for operation in VOX mode which can
be selected according to the ambient conditions.
Loud environment
Activating/Deactivating VOX mode
To deactivate VOX mode, select the OF" setting.
3x ¤, X/Y,
[ 2 ], t
Selecting/Deactivating ringing tone
To deactivate the ringing tone, select the OF" setting.
4x ¤, Y/X,
[ 4 ], t
Confirmation signal
On releasing the t button, the subscriber hears a signal tone. This indicates
to the other party that you have completed your transmission and he/she can
transmit.
5x ¤, X/Y,
[ OF ], t
Key beeps
The key tone is sounded when a button is pressed.
6x ¤, Y/X,
[ OF ], t
Double channel monitoring
It is possible to monitor two channels simultaneously. When double channel
monitoring is activated, the walkie−talkie switches between the two set channels
until it detects a signal. DCM appears in the display. The first channel is the one
currently set.
Setting the second channel / CTCSS code
To deactivate double channel monitoring, select the OF" setting.
7x ¤, X/Y, [ 6 ],
¤, X/Y, [ 32 ],
t

Stopwatch

You can use the walkie−talkie as a stopwatch (60 seconds).
a, ¤
Use the following buttons to operate the stopwatch.
X
X
38
1
Normal environment
2
Select the setting and confirm
Select the setting and confirm
Activate/Deactivate the confirmation signal
Activate/Deactivate the key tone
Set the channel, set the CTCSS code and
confirm
Activate/Deactivate the stopwatch
Start / Stop
Reset
3
Quiet environment