Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1 - Introduction
1.3 - General description
The Stereo Control is a device which allows the interfacing, insulation, level adaptation and control
via infrared signals between an external stereo source and the sound system BUS.
The item enables you to store and replicate infrared remote control codes with an operating
range between 30Khz and 80Khz. Carefully check this feature and if necessary contact Legrand's
technical assistance to verify its compatibility.
8
7
6
Led indication tables
SIGNAL BALANCE LED (3)
No signal
OFF
Audio signal present
GREEN
Best setting
GREEN(1)
Signal too high
ORANGE(2)
(1) ORANGE flashing on the peaks only
(2) Continuous ORANGE
5
4
3
LEGEND
1
Audio stereo input with double
RCA connector
2
Signal balance pushbuttons
3
Signal balance LED
4
Power supply LED
5
Infrared detector
6
USB Connector
1
7
3.5 mm connector for cable with
IR transmitter
8
8-pole connector for sound
2
system BUS
POWER SUPPLY LED (4)
Stand by
GREEN
On
YELLOW
13
Publicité
Chapitres
Table des Matières
