Installation; Wiring Diagram - LEGRAND Contrôle Stéréo Notice D'installation

2 - Installation

2.1 - Wiring diagram

Install the cable with IR transmitter, applying the adhesive part of the transmitter close (max 1
cm) to the source IR receiver (do not connect the transmitter above the IR receiver). The maximum
distance between the device and the source must be 1 m.
14
Adhesive IR
transmitter
Stereo source
IR detector
Please note: do not increase the cable length with an IR transmitter. If you use the Hi-fi
system headphone output, mind the level of the volume.
2 m long BUS cable
(supplied)
1.8 m long cable with IR
transmitter(supplied)
7 8
5 6
Sound system BUS
Terminals 5 and 6
Stereo control
035 86
RCA/RCA cable
(supplied)