BEHA UNITEST UNIdreh 700 Mode D'emploi page 12

5.2 Fuse replacement (UNIdreh EVU only)
The UNIdreh EVU has fixed measuring lines and test probes with
built-in fuses 0,5 A / 500 V, 6 x 32 mm.
The front part of the test probe is screwed together with the
handheld part. The fuse can be taken after solving the bolted joint.
Attention !
Ensure that the fuses are in perfect condition and correctly
positioned in fuse holder.
Fuse 500 mA / 500 V, 56 kA cut-off capacity, 6,3 x 32 mm
Attention !
In order to avoid fire hazard only use the correct fuse with
characteristics regarding type, voltage and cut off as specified in
the instruction manual. The use of auxiliary fuses especially short-
circuiting of fuse holders is strictly forbidden.
6.0 Specifications
Phase indication:
Rotary field indication: 2 LED
Voltage range:
Frequency:
Operation:
Current pick-up:
Overvoltage class:
Pollution degree:
Temperature range:
Protection:
Test voltage:
Dimensions:
Weight:
12
UNIdreh 700
3 LED's
70 ... 700 V 3 ;
15 ... 400 Hz
continuous operation
approx. 3 mA
CAT III, 500 V to ground
2
0 ... 40° C
IP 40
2 kV
approx. 124 x 61 x 27 mm
approx. 200 g
UNIdreh LCD/UNIdreh EVU
LCD-Segment L1, L2, L3
LCD Segments R, L
40...700 V ;
approx. 1 mA
approx. 200 g
(UNIdreh EVU approx. 350 g)