Piscine Laghetto Pop! Classic Notice De Montage page 34

6. Starting from the four corners, thread steel pins F through foot straps and throu-
gh stainless steel rings G of each "V" D pole (it is easier to do this operation if
one person is inside the pool lifting a corner from a "V" pole D while another
thread the steel pin F through foot strap).
7. When all the steel pins F are placed, while still inside of the pool, attach the
Skimmer for the filtration system (see filtration instructions).
8. Apply under each leg the specific spacer G,H.
NotnecessaryifyouhavetheLaghettofootblocks.(see11)
9. Smooth out the bottom to
remove any fold by gently
pulling the webbing straps
of the pool supports
(neverpullthepoles!).
10. Join up the pool / filtration system connection hoses.
38