Piscine Laghetto Pop! Classic Notice De Montage page 30

6. Starting from the four corners, thread steel pins F through foot straps
and through inox rings G of each "V" D pole
(it is easier to do this operation if one person is inside the pool lifting a corner
from a "V" pole D while another thread the steel pin F through foot strap).
7. When all the steel pins are placed, while still inside of the pool, attach the Skim-
mer for the filtration system (see filtration instructions).
8. Apply under each leg the specific spacer E
NotnecessaryifyouhavetheLaghettofootblocks.(see11)
9. Smooth out the bottom to
remove any fold by gently
pulling the webbing straps
of the pool supports
(neverpullthepoles!).
10. Join up the pool / filtration system connection hoses (see filtration instructions).
34