Use Of Wps - Conrad N150 Mode D'emploi

e) Use of WPS
• Click the item "WPS" in the menu item "Wireless Settings" to use the WPS function.
• Scroll slightly down if you want to use, e.g. the "Push Button" method. Change the selection
from "PIN" to "PBC" and click "Apply".
• Now WPS is active and you can operate the WPS button at your device to log it on to the
router.
If you prefer using the PIN method, the process is nearly identical, but you need
to leave the "WPS mode" set to "PIN". It may also be necessary to activate the
function fi rst.
70