Confi Guration Of The Operating Mode "Gateway - Conrad N150 Mode D'emploi

10. Confi guration of the Operating Mode "Gateway"
This chapter describes the basic confi guration of the operating mode "Gateway". This mode is
used to operate the product as a WLAN router. Access to the Internet is established via a DSL
or cable modem.
If you have already confi gured the product differently, perform a reset as described in chapter
14 fi rst.
• Before you start the confi guration, connect your DSL or cable modem to the WAN port (4) fi rst.
Best use the original connection cable of your model for this. Then switch it on.
Otherwise, the router must be connected as described in chapter 7.
• After you have signed on at the web interface, fi rst click the menu item "Operation Mode" and
select the operating mode "Gateway".
Save the setting with "Apply".
• The settings are accepted. This may take several seconds.
57