iRobot ROOMBA 5210 Manuel De L'utilisateur page 7

Maintenance
To keep Roomba running at peak performance, it is recommended that you
perform the following maintenance tasks every three uses:
1
Remove and empty Roomba's bin
press button and
pull to remove bin
2
Clean Roomba's filter
compartment
A. Clean or replace filter*
B. Clean filter
compartment
*Replace filter every 2 months

Inspect and wipe sensors clean
each month
Cliff sensor
openings
Contact
points for
home Base
Dirt Detect
sensor
Additional information in English and instructional photos are available at www.irobot.com/usetips
Empty bin

Clean Roomba's brushes regularly
A. Remove brush guard by pulling
both yellow tabs
B. Remove both brush caps from end of
bristle brush and use scissors to cut
any hair wrapped around the brush.
C. use the Roomba cleaning tool to
comb hair from brush.
D. Remove and clean hair and dirt from
Roomba's brush bearings.
Brushes
Brush
caps
Brush
caps
Brush
bearings