Hama RC 540 Mode D'emploi page 3

G Operating instruction
Controls and Displays
A Controls
1. Display
2. CLOCK button
= sets the time
3. ALARM button
= displays alarm time (approx. 5
seconds); used for setting alarm
4. -button
= reduces the current set value
5. -button
= increases the current set value
6. SNOOZE / LIGHT-button
= activates the backlight (approx. 5
seconds)/postpones the alarm for
5 minutes
7. Twilight sensor
8. ON/ OFF slide switch
= activates/deactivates the twilight
sensor
9. RESET button
= restores factory settings
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your attention to
speci c hazards and risks.
Note
This symbol is used to indicate additional information or important notes.
2
10. RCC button
= activates/deactivates manual radio
signal reception; switches between °C
and °F
11. ALARM ON/OFF slide switch
= activates/deactivates the alarm
12. Battery compartment
B Displaysymbole
1. Time
2. AM/PM (12-hour format)
3. Day
4. Month
5. Day of the week
6. Temperature
7. Signal strength
8. Summer time
9. Alarm time
10. AM/PM (12-hour format) alarm time
11. Alarm clock icon
12. Alarm clock display icon