Using Audio And Video Equipment - Sony Bravia KDL-40R380B Mode D'emploi

Using Audio and Video
Equipment
1
Turn on the connected equipment.
2
Press INPUT to display the input source.
3  
Press / then to select the desired
input source.
The highlighted item is selected if 2 seconds
pass without any operation.
Note
• When connecting a digital audio system not compatible
with Audio Return Channel (ARC) technology using an
HDMI cable, you need to connect an optical audio cable to
the DIGITAL AUDIO OUT (OPTICAL) to output digital
sound.
• When connecting with an HDMI cable, be sure to use
HighSpeed HDMI Cable with Cable Type Logo
(Recommended SONY Cable).
• When connecting mono equipment, connect the audio
cable to the L (mono) jack.
• When connecting a device that has DVI output, connect
the DVI HDMI video cable to the HDMI IN 2 (ARC).
To use MHL device
Use an authorized MHL 2 CABLE with MHL logo (not
supplied).
The TV simultaneously charges the
MHL-compatible connected device while playing
photo/music/video files.
To use BRAVIA Sync devices
When connecting the TV to BRAVIA Sync
compatible equipment, you can control them
together.
Be sure to perform the necessary settings in
advance. The BRAVIA Sync Control settings must be
set on both the TV and the connected equipment.
See BRAVIA Sync Settings (page 24) for the
settings on the TV side. Refer to the connected
equipment operating instructions for the settings
on the connected equipment side.
US
27 US