To replace the active carbon filter:
1.
Disconnect the power supply from the wall socket.
2.
Remove the mesh filter(s).
3.
Replace the active carbon filters on both sides of the motor. NOTICE Turn left
to remove a previously installed carbon filter. Turn right to place a carbon filter
on the motor. Turn the filter slightly to the left or pull it carefully until the filter is
installed properly.
4.
Match the brackets of the filter with the holding mechanism of the motor and
pull carefully until the filter locks.
5.
Place the mesh filter.
6.
Connect the power supply to the wall socket.
54 |
VESTEL VHIA90AX - VHIA90AS