chain through the suspension eyes in the ceiling. Pulling the chain through the
suspension eye and fastening the second karabiner hook to the chain allows you to
raise the suspension height of the heater. You can also wrap the chain around a
horizontal beam or rod (see picture).
Please always take account of the minimum distances to the ceiling, floor, walls and
objects and make sure the heater is horizontal!
The following applies for all options:
However you install the GOLDEN AMBER SMART, always lead the electrical cable
17
Fix the mounting bracket totally horizontal on the
wall with the four anchor dowels provided see fig.
Hang the terrace heater with the suspension
bracket in the wall bracket. Refer to the picture.
Slide the bracket through the wall bracket as far as
possible – the small hole in the bracket protrudes
under the wall bracket. Secure that terrace heater
by screwing the short wing nut supplied as far as
possible into the small hole in the suspension
bracket.
2 – Suspension from a frame (parasol, tent or similar
item) by means of a bracket
Ascertain that the frame from which you wish to
suspend the terrace heater is strong enough to
take the weight of the terrace heater for an
extended period of time.
Choose which of the three supplied brackets is
suitable for the frame. You must choose the
smallest possible option.
Slide the bracket around the frame, place the
terrace heater against it and screw the bracket to
the suspension bracket with 2 wing nuts (see
picture).
3 – Suspension from a ceiling by means of chains
Choose 2 suspension points in the ceiling, 40 cm
apart. Ascertain that the ceiling and fastening
materials are strong enough and suitable to take
the weight of the heater for an extended period of
time.
Fasten the suspension eyes to the ceiling (not
supplied).
Hook one end of the chains onto suspension points
of the heater by means of the karabiner hook. You
hook the karabiner hooks at the other end of the