Important Safety Instructions; Charger Mounting - GreenWorks Tools 29807 Mode D'emploi

EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
the battery from the charger and insert again
within 2 hours. If the indictor shows charging,
that means the battery is good. After 2 hours,
please pull out the battery and also pull
out the AC power plug of the charger for 1
miniute, and then insert the AC power plug
and the battery again. If the indictor shows
charging, that means the battery is good. If
not, the battery needs to be changed.
CHECKING THE CHARGER
If the battery pack does not charge properly:
▪ Check the current at the power outlet with
another tool. Make sure that the outlet is
not turned off.
▪ Check that the charger contacts have not
been shorted by debris or foreign material.
▪ If the surrounding air temperature is not
normal room temperature, move the
charger and battery pack to a location
where the temperature is between 6 ˚C and
40˚C.
If the battery is inserted into the charger
when warm or hot, the CHARGING LED
indicator light on the charger may switch
on and illuminate ORANGE. If this occurs
allow the battery to cool outside of the
charger for approximately 30 minutes.

CHARGER MOUNTING

1. This charger can be installed hanging on a
wall using two screws (not supplied).
2. Locate the placement for the charger to be
wall mounted.
3. If fastening to wood studs use 2 wood
screws.
4. Drill two holes 2 3/8" (6 cm) on center
ensuring they are level.
5. If fastening to drywall use wall anchors and
screws to secure the charger to the wall.
English (Original Instructions)
WARNING
NOTE: If the battery and the charger won't
be used for a long time, please remove the
battery from the charger and pull out the AC
power plug.

IMPORTANT SAFETY INSTRUCTIONS

1. SAVE THESE
DANGER: TO REDUCE RISK OF FIRE
OR ELECTRIC SHOCK CAREFULLY
FOLLOW THESE INSTRUCTIONS.
2. Confirm the voltage available at each
country location before using the charger.
3. If the shape of the plug does not fit the
power outlet, use an attachment plug
adaptor of the proper configuration for the
power outlet.
5
INSTRUCTIONS -