E.ziclean FURTIV by E.ZICOM
Manuel Utilisateur – User Manual
8. Auto charging Dock station
a. Docking station display and control panel
1
LED decorative light
Turn on the decorative light to activate the
atmosphere.
2
Decorative light switch
Press the switch to turn on/off while the decorative
light is on.
3
Power LED
The Power LED will light when the Docking Station is
connected with the power, or turn off if not connected.
4
Charging indicator
The indicator will flicker while the recharger is
connected with the cleaner.
5
Signal transmitting
Transmitting signal is the only way to lead the cleaner
to return the Docking Station for charging, so the
signal transmitting position should be clean for long
without any obstacle on it.
6 – 7
Recharging positive
The electrode and that of the Cleaner are connected
& negative electrode
to charge under contact mode, so the position should
be clean without any obstacle on it while using, or
there will be impact to the charging.
8
Charging power DC
The power DC socket, called recharger for short, used
socket
to connect output terminal DC24V of the adaptor, is
the charging transit station between the Cleaner and
adaptor, so the recharger should be placed against the
wall firmly and the adaptor cable should be away from
the recharger, or the Robot may have impact and
winding during cleaning.
1.LED decorative light (a little essence can be
placed above)
2.Decorative light switch
3.Power LED
4.Charging indicator
5.Signal transmitting
6.Charging positive electrode
7.Charging negative electrode
8.Charging power DC socket
E.ziclean FURTIV by E.ZICOM
Manuel Utilisateur – User Manual
9. Space Isolator
a. Space isolator display and functions
Space Isolator, an accessory of the cleaner, can block area by sending special infrared
signal so as to prevent the Cleaner from entering some unnecessary areas.
N°
NAME
FUNCTION INFORMATIION