E.zicom E.ziclean FURTIV Manuel Utilisateur page 23

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

E.ziclean FURTIV by E.ZICOM
Manuel Utilisateur – User Manual
6. Reverse the dustbin, tear out the mop, release the trailing bar and then unplug the right
and left fasteners on the bottom of the dustbin (Refer to Figure 8 and Figure 9). All parts
should be assembled as before disassembly.
Don't use the mop and trailing bar on the carpet or uneven ground.
E.ziclean FURTIV by E.ZICOM
Manuel Utilisateur – User Manual
Cleaning of Dustbin and Blower:
First dump the dust, and then clean
it with Dust Brush. (Refer to Figure 1)
Pop up the blower, and then clean
the air inlet/outlet with dust brush.
(Refer to Figure 2 and Figure 3)
Don't clean the blower in water! Pop
up the blower, take out the filter, and
then clean the dustbin in water. (Refer
to Figure 4)
Clean the filter by hairdryer or Dust
brush. (Refer to Figure 5 and Figure 6)
After cleaning, you can assemble it
firmly as before the disassembly.

Publicité

Table des Matières
loading

Table des Matières