Explanation Of The Leds On The Receiver - vse Weber Hydraulik Notice D'utilisation

you VSE takes you further! takes further!VSE you further!VSE takes takes further! VSE takes you you further!VSE takes VSE further! you

Explanation of the LEDs on the receiver

Explanation of the LEDs on the receiver
The two LEDs at the top:
• Flashing = system switched on Flashing = system switched on
• Lit continuously = Lit continuously = centering function active
• Flashing slowly = emergency stop activated Flashing slowly = emergency stop activated
• Off = manual control mode off Off = manual control mode off
Status LED:
• Flashing = a button is pressed Flashing = a button is pressed
Explanation of the LEDs on the Explanation of the LEDs on the handset
Status LED:
• Flashing = a button is pressed Flashing = a button is pressed
Battery LED:
• Flashing red = replace battery Flashing red = replace battery
Gebruikershandleiding
User Manual
Benutzeranleitung
Notice d'utilisation Documentnr. Notice d'utilisation Documentnr.
top:
Figure 3: receiver Figure 3: receiver
Figure 4:handset Figure 4
Status LED
Pagina 15
A10477.0.01.B
LEDs
Status LED
Batterie LED