Yamaha YVC-1000 Guide De Référence Rapide page 5

YVC-1000 Quick Start Guide
29 Turn the volume down to the minimum level before starting
playback.
Failure to observe this will cause loud noises to be emitted that
may result in hearing impairment.
30 Ensure not to use the product anywhere it will be exposed to rapid
changes in the ambient temperature. Any rapid change in the
ambient temperature could result in condensation on the product,
which could then result in damage to the product. Ensure to leave
the product for a while until it has dried off with the power turned
off if any condensation has occurred.
31 Ensure not to connect any cables while the power is turned on.
Failure to observe this could result in damage to the product and
any connected equipment.
This unit is not disconnected from the AC power source as long as it is connected to the AC wall outlet, even if this unit
itself is turned off. This state is called the standby mode. In this state, this unit is designed to consume a very small quantity
of power.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR
MOISTURE.
Warning: Operation of this equipment in a residential environment could cause radio interference.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received including interference that may cause undesired operation.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canadaʼs licence-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC
radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least
20 cm or more away from person's body.
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment and meets RSS-
102 of the ISED radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator
at least 20 cm or more away from person's body.
4
32 Ensure to earth any static electricity from your body or clothing
before touching the product. Failure to observe this could result in
damage to the product.
33 Route and connect the cables correctly.
If the cables are pulled or become caught on someone's leg, the
product or connected equipment could tip over or fall, thus
resulting in injury or damage to the product.
34 Before connecting external equipment, thoroughly read the
instruction manuals provided with the equipment and make
connections according to the instructions.