Burner Caps And Heads; After Cleaning - LG LCG3691ST Guide D'utilisation

CARE AND CLEANING OF THE COOKTOP

BURNER CAPS AND HEADS

BURNER CAPS
Lift burner caps off when they are cool.
Wash burner caps in hot, soapy water and rinse with
clean water. You may scour with a plastic scouring
pad to remove burned-on food particles.
Burner cap is
properly seated.
Dual Extra Large Burner outer cap (on some models)
To place the dual extra
large burner outer cap
properly, make sure the
slit in the burner cap is
positioned over the
assemble guide in the
burner head.
(LCG3091ST,LCG3691ST only)
BURNER HEADS
Cooktop
The burner heads are removable.
Simply lift them off the cooktop for cleaning.
The slits in the burner heads must be kept clean at
all times for an even flame. Clogged or dirty burner
ports or electrodes may cause improper operation
of the cooktop.
Any spill on or around an electrode must be carefully
cleaned. Take care to not hit an electrode with
anything hard or it could be damaged.
You should clean the burner caps and heads routinely,
especially after bad spillovers which could clog the
openings. Lift burner heads off when they are cool.
Burner cap is NOT
properly seated.
slit
assemble
guide
To get rid of burned-on food, soak the burner heads
in a solution of mild liquid detergent and hot water
for 20–30 minutes. For more stubborn stains, use a
toothbrush.
NOTES:
• Do not use steel wool or scouring powders to clean
the burners.
• Burners will not light if the cap is removed.

AFTER CLEANING

Before placing the burner caps and burner heads
back, shake out excess water and then dry them
thoroughly.
REPLACEMENT
Replace burner heads and caps over the electrodes
on the cooktop, in the correct locations according
to their size. There are one small, two medium, one
large and one extra large burner head and cap.
Medium burner
head and cap
Extra large burner (Center)
head and cap
(LCG3091ST,LCG3691ST only)
Small burner
head and cap
Lrage burner
head and cap
11