Velleman DVM893 Mode D'emploi page 17

Open circuit voltage: ± 2.8 V
Display: approximation of diode forward voltage drop
Overload protection: 250 VDC or 250 VAC rms
Continuity beeper: ≤ 50 Ω
Test current: ± 1 mA
Open circuit voltage: ± 2.8 V
Display: hFE approximation (0 ~ 1000)
Base current: 10 µA
Vce: ± 2.8 V
Overload protection: fuse F250mA/250V
Range
2 nF
20 nF
200 nF
2 µF
100 µF
Overload protection: fuse F250mA/250V
Range
-20 °C ~ 0 °C
1 °C ~ 400 °C
401 °C ~ 1000 °C
Temperature indication does not include thermocouple error.
Overload protection: fuse F250mA/250V
Caution: Max. temperature is 250 °C with the included thermocouple. For
measuring higher temperatures (up to 1000 °C), use a suitable thermocouple.
Use this device with original accessories only. Velleman nv cannot be held
responsible in the event of damage or injury resulting from (incorrect)
use of this device. For more info concerning this product and the latest
version of this manual, please visit our website www.velleman.eu.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide
rights reserved.
No part of this manual may be copied, reproduced, translated or reduced to any
electronic medium or otherwise without the prior written consent of the copyright
holder.
V. 03 – 01/02/2013
DVM893
Continuity
Transistor
Capacitance
Resolution
1 pF
10 pF
0.1 nF
1 nF
100 nF
Temperature
Resolution
1 °C
17
Accuracy
± (4.0 % of reading + 3 digits)
± (6.0 % of reading + 10 digits)
Accuracy
± (5.0 % of reading + 4 digits)
± (2.0 % of reading + 3 digits)
± (2.0 % of reading + 5 digits)
©Velleman nv