Installing The Camera; Description Of The Camera - Extel WESV 82600 Guide D'installation Et D'utilisation

INSTALLING THE CAMERA

4
CAUTION
a. Description of the camera
1
2
3
4
1. Adjustable antenna to be screwed at the back of the camera.
2. Protection of the cameras (IP 44).
3. Lens of the camera.
4. Screw to fix the position of the camera.
5. Camera bracket.
6. Microphone (in the empty part of the housing).
7. Plug to connect the adaptor.
8. Cell to activate the IR diodes, in the darkness.
9. Infrared diode (non visible lighting system)
10. Red light indicator, confirming the power supply of the camera.
11. Green light indicator, indicates that the camera is displayed on the monitor.
12. Fixing screw for the U-bolt
13. Button to associate the camera with its monitor: "pairing key".
14. 5 VDC Adaptor (angle plug).
b. Installing the camera
Choose a suitable location to install the camera.
As far as possible your system must be installed in a dust-free place with weak vibrations and
a good circulation of air and must be equipped with a wall socket for the 5 VDC adaptor.
When installing the camera, check the good reception of the images on the monitor before
the final installation. For example ask another person to hold the camera in the area to
control.
Ask another person to move the monitor to different places in the house to check the good
reception.
If you find some interference or other problems, please refer to the chapter "Mainte-
nance".
6GB
in the wall.
11
10
7
3 8 9
CFI EXTEL WESV 82600 - 06/2009 - V1
12
13
14
6