Inserting/Changing Batteries - ADE Eni KE 1808-1 Mode D'emploi

Inserting/changing batteries

1. Push the locking tab towards the battery
2. Insert the batteries as shown on the bottom
3. Slide the battery compartment lid back into
Suggestions for changing the battery:
‚ Battery replacement is necessary if the display
‚ Only use the battery type specified in the
‚ Always exchange all of the batteries at the
‚ Dispose of old batteries in an environmentally
38
Druckbuch ENI 3Sprach.indb 38
compartment cover and remove the battery
compartment cover.
of the battery compartment. Observe the
correct polarity (+/-).
place until stop.
shows either a battery symbol or nothing at all.
"Technical Data".
same time.
friendly manner, see "Disposal".
25.04.2018 11:39:09