Assembly And Use - Classic Accessories Bozeman Manuel De L'utilisateur

B O Z E M A N P O N T O O N B O A T O W N E R ' S M A N U A L
1. Confirm that all the parts are present.
(See the parts list on page 9).
2. Identify the right and left pontoons.
You can identify the right and left pontoons by the "R" (right) and "L" (left) labels
sewn on the inside of the main pontoon pocket on top of each.
3. Inflate the pontoon bladders.
The valve is located on the top of the
pontoons in front of the main pocket
[A].
The valve has a center button that
opens and closes by simply pushing
down [B].
THE VALVE IS OPEN WHEN THE CENTER
BUTTON IS DOWN, AND CLOSED
WHEN IT IS UP. BEFORE INFLATING,
MAKE SURE THE VALVE IS IN THE UP
(CLOSED) POSITION.
Unscrew the valve cap, make sure the
valve is closed. If the valve is open,
unlock it by pushing down on the
button and turning a quarter turn. Insert the inflation adapter into the valve and twist to secure [C].
Inflate using a foot pump or hand pump with a cone-type nozzle fitting [D].
Inflate the pontoon to about 3/4 full.
Do not inflate beyond 3/4 full because it
will make the next step very difficult—attaching the pontoons to the frame.
Repeat this step with the other pontoon. You will fully inflate the pontoons in step 8.
4. Attach the seat frame to the pontoon side frames.
Locate the seat base frame and pontoon side frames.
The front of the pontoon side frames are the ends
labeled "L" (left) and "R" (right).
First, remove the four tube end caps in the side posts
of the pontoon side frames. Make sure the seat
frame strap is facing to the rear. Then insert the seat
platform frame rails into the pontoon side frame posts.
Insert four clevis frame pins from the top down into
the holes where the four seat platform rails slide onto
the pontoon side frame posts. Each wire security
retainer must go over the seat frame rail and then over
the clevis pin as shown.
You MUST lock the security retainers on all four
clevis pins to insure that the frame stays together.
A S S E M B L Y A N D U S E
A
Inflation Valve
D
10
B C
Press and
Insert
turn on
into
center
valve and
button
twist to
inflate
Front
Left
pontoon
side
frame
Seat
Rear
Frame
Seat frame strap to rear
Inflation
adapter
Right
pontoon
side
frame