Connecting The Water Supply - Rotel G5401CH Mode D'emploi

Connecting the water supply

Warning:
o
To prevent leakage or water damage, follow the instructions in this chapter.
o
Do not kink, crush, modify or sever the water inlet hose.
o
For models with a hot valve, connect it to hot the water tap with the hot water
supply hose. Energy consumption will decrease automatically for some
programmes.
Connect the inlet pipe as indicated. There are two ways to connect the inlet pipe.
o
Connection between ordinary tap and inlet hose:
Loosen clamp nut Tighten clamp nut
and four bolts
o
Connection between screw tap and inlet hose:
Tap with threads and inlet hose
Connect the other end of inlet pipe to the inlet valve at the rear of product and fasten the
pipe tightly clockwise.
Water inlet valve
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
Press slide bushing,
and insert inlet hose
into connecting base
Special tap for washing machine
Water supply hose
95
Connection
finished