Removing Transport Bolts; Levelling The Washing Machine - Rotel G5401CH Mode D'emploi

Removing transport bolts

Please do the following to remove the bolts:
o
Loosen the 4 bolts with a spanner and then remove them.
o
Insert the plugs into the holes.
o
Keep the transport bolts safely for future use.
Warning:
o
You must remove the transport bolts from the rear before using the product.
o
You'll need the transport bolts again if you move the product, so keep them in a
safe place.

Levelling the washing machine

o
Check that the legs are firmly attached to the cabinet. If not, please turn them to
their original positions and tighten the nuts.
o
Loosen the lock nut and turn the feet until they are in firm contact with the floor.
o
Adjust the legs and lock them with a spanner, making sure the machine is steady.
Warning:
o
The lock nuts on all four feet must be screwed tightly to the housing.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
94