Things Not To Do; Machine Operating Cycle - Luxia POLY 1000 Manuel D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

• Do not operate the machine when you are
barefoot.
• Do not pull the power supply cable to disconnect
the machine from the mains.
• Do not leave the machine exposed to the
weather (snow, rain, etc).
• Do not leave solid particles on the dishes to be
loaded into the machine.
• Do not put your hands into the tank when the
machine is on (you might touch the water
heating resistance!).
• Do not touch the door safety microswitch (a).
• Do not close the door if the basket is not correctly
positioned.
• Do not allow any use of the machine by children
or unexperienced people.
• Do not use the machine without the proper filter
(b) in the tank.
• Do not leave the machine main switch on when
you have finished using it.
• Do not oil in any way any part of the machine.
• Do not modify the temperature as set in the
factory; if necessary, call a specialized technician.
• Use only industrial detergents.
• Do not leave the machine in wash mode without
the overflow pipe.
A machine operating cycle is made up of:
For the POLY1000 and POLY 1500 versions:
1) One washing (lasting 105 seconds) with jets of
hot water (55°-60° C) under pressure, mixed
with detergent.
2) One rinse (lasting 15 seconds) with jets of hot
water (75°-90° C), clean and mixed with rinse
aid.
For the POLY2000 version:
1) One washing (lasting at will) with jets of hot
water (55°-60° C) under pressure, mixed with
detergent.
2) One rinse (lasting at will) with jets of hot water
(75°-90° C), clean and mixed with rinse aid.
The length of the machine working cycle can be
set by the user by placing the selector dial (b) in
the desired position.
DANGER: The machine working cycle is stopped in case of accidental door opening,
thanks to a safety microswitch (a).
When the door has been closed, the cycle restarts right from the point where it had
been stopped.
Operating and service manual

22 - THINGS NOT TO DO

23 - MACHINE OPERATING CYCLE

a
a
a
POLY 1000/1500/2000
English
b
b
pag. 43 di 132

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Poly 1500Poly 2000

Table des Matières