Connecting The Rinse Aid Measure And Detergent; Checks To Be Carried Out Before The First Start-Up - Luxia POLY 1000 Manuel D'utilisation Et D'entretien

English

17 - CONNECTING THE RINSE AID MEASURE AND DETERGENT

Connection of the rinse aid measure to the rinse
aid container (b) is made by means of the proper
tube (a).
For machine models with built-in automatic (d)
liquid detergent measure (optional)
For machines equipped with this device you must
proceed as follows:
a
1) Prepare a clear tank (c) with the detergent
close to the machine.
2) Insert the aspirating tube (d) into the detergent
b
container, making sure that filter (e) at its end is
clean and in good conditions.
The device is automatically activated when water
fills the machine and the washing cycle starts.
d
c
e

18 - CHECKS TO BE CARRIED OUT BEFORE THE FIRST START-UP

Before starting up the machine, check that the water (loading and unloading) and electricity connections
have been carried out according to the regulations contained in the "INSTALLATION" chapter.
ERGONOMICS
When using the machine the operator should follow common ergonomic principles.
MACHINE TRIAL
All machine functions have already been fully tested in the factory, before machine delivery.
RUN-IN
The machine does not need any run-in.
POLY 1000/1500/2000
Operating and service manual
pag. 39 di 132