Use - Imetec Bellissima B8 100 Mode D'emploi

Warning:
When you have finished using the hair
straightener, make sure the appliance has
completely cooled down before placing it back
in its case (or any bag).
This appliance is not intended to curl hair,
accordingly it must not be turned during use.
PREPARING YOUR HAIR
• Wash hair as normal and comb to remove knots.
• Dry your hair and brush from the roots to the ends.
OPERATION
• Connect the power cable (3) to the mains.
• Switch on the ON/OFF button (5) and let the straightener
heat up; the LCD display (1) will light up.
• Select the desired temperature by using the adjustment
button + or – (6). It is possible to choose the temperature
according to the type of hair and desired styling in a range
between 130 and 230 °C. The temperature can be adjusted
at any time by pressing the adjustment buttons.
• Press the + and - buttons (6) simultaneously to block the
temperature at the desired level. The "lock" symbol will
appear on the LCD display (1).
• Use your fingers to take a thin lock of hair, the same width
as the heating plates, and place it between the plates (7).
• Keep the lock of hair taut with one hand and, with the other
hand, slide the closed plate from the roots down to the
ends.
• Once you have finished straightening, switch the appliance
off from the ON/OFF button (5) and disconnect the power
supply plug (3) from the socket.
ATTENTION!
straightening; this is excess humidity in the hair
evaporating.
NOTE: contact an authorised technical service centre if
two lights flash at the same time in the temperature box,
as this means the product is having operating problems.

USE

Steam may
11
EN
appear while