Declaration Of Conformity - stayer S90PE Instructions D'emploi

- In extreme working conditions, conductive dust
can accumulate in the interior of the machine when
working with metal. The protective insulation of the
machine can be degraded. The use of a stationary
extraction system is recommended in such cases as
well as frequently blowing out the ventilation slots
and installing a residual current device (RCD).
Lubricate the guide roller (10) occasionally with a drop of
oil. Check the guide roller (10) regularly. If worn, it must be
replaced through an authorised Stayer after-sales service
agent.
WARNING! Important instructions for connecting a
new 3-pin plug to the 2-wire cable. The wires in the
cable are coloured according to the following code:
Do not connect the blue or brown wire to the earth terminal
of the plug.
Important: If for any reason the moulded plug is removed
from the cable of this power tool, it must be disposed of
safely.
If the machine should fail despite the care taken in
manufacturing and testing procedures, repair should be
carried out by an after-sales service centre for Stayer
power tools.
Repair service of the manufacturer or commercial
agent
Stayer Ibérica S.A.
Área Empresarial de Andalucía - Sector 1
Calle Sierra de Cazorla nº7.
CP: 28320. Pinto (Madrid) Spain.
Disposal
It is compulsory to subject electric tools,
accessories and packaging to a recovery
process that respect the environment.
For EU countries only:
Do not throw away electric tools!
In accordance with European Directive 2012/19/CE on
unserviceable electric and electronic apparatus, after its
transposition into national law, they must be collected
separately to subject them to ecologic recycling.
The right to amendment is reserved.
ENGLISH
20

Declaration of Conformity

The undersigned: STAYER IBÉRICA, S.A.
With address at:
Calle Sierra de Cazorla, 7
Área Empresarial Andalucía - Sector 1
28320 PINTO (MADRID)
Tel.: +34 902 91 86 81
CERTIFIES
That the machine:
Type: Jigsaw
Models:
S110PE / S110PEK / S90PE / SL18 / JS70PE / JS80PE
JS55BE
We declare under our sole responsibility that the product
described under "Technical Data" is in conformity with the
following standards or standardization documents: EN
62841-1, EN 62841-2-11, EN 55014-1, EN 55014-2,
EN 61000-3-2, EN 61000-3-3, accord-ing to the provisions
of the directives 2006/42/EC, 2014/30/EU, 2011/65/EU,
2012/19/EU.
Ramiro de la fuente
Director Manager.
20
January 2020