Cleaning And Maintenance - PALSON Spin Plus Mode D'emploi

4. Do not use the blender for more than 1 minute at a time. After use, let it rest for 1
minute.
PRECAUTION: The blade is very sharp.
PRECAUTION: Do not use food items without water or another liquid.
HOW TO USE THE GRINDER BOWL (fIG.2)
1. The grinder bowl is perfectly suitable for firm foods such as meat, cheese, onions,
garlic, carrots, walnuts, almonds, etc.
2. Do not grind very firm items such as ice cubes, coffee beans or cereals.
Before grinding:
1. Carefully remove the lid of the grinder bowl (4).
PRECAUTION: The blade is very sharp. Always hold the upper plastic part.
2. Position the blade (5) in the middle of the grinder bowl (4). Press the blade and lock
the bowl.
3. Put the food into the grinder bowl (4).
4. Replace the lid of the bowl (6).
5. Firmly attach the motor unit to the lid of the bowl.
6. Select the desired speed with the speed dial (7) and press the speed button (10) or
the turbo button (8) to use the grinder. During the process, hold the motor unit with
one hand and the grinder bowl with the other.
7. After use, detach the motor body (1) from the grinder bowl.
8. Remove the blade (5) carefully.
9. Do not grind firm items for more than 10 seconds. After use, allow it to rest for 2
minutes.

CLEANING AND MAINTENANCE

Clean the motor body (1) with a damp cloth only. Do not immerse the motor body (1)
in water.
1. Unplug the blender before cleaning it.
2. All the other parts can be washed in the dishwasher. However, after processing very
salty items, you should immediately clean the blades with water.
3. Avoid using too much detergent or descaler in your dishwasher.
4. When processing coloured items, the plastic parts of the blender may become
stained. Clean the parts with vegetable oil before placing them in the dishwasher.
5. The blade is very sharp so handle it carefully.
PROCESSING GUIDE (fOR THE GRINDER BOWL)
food
Meat
Walnuts
Cheese
Bread
Onions
6
30823_manual spin plus.indd 6
Maximum
500 ml grinder bowl
250 g
100 g
100 g
80 g
150 g
Operating time
8 sec.
8 sec.
5 sec.
5 sec.
8 sec.
24/07/14 9:15