Alpine HALO11 Guide D'installation page 8

01GB00-US.book Page 6 Monday, April 27, 2020 5:11 PM
2
Fix the Display unit to the slider of the main unit using 4
screws (M4×6).
3
Mount the POWER PLATE using a screw (M3×4).
POWER PLATE (included)
• If you do not attach the POWER PLATE, the display will not turn on.
Make sure to attach the POWER PLATE.
6
-EN
01GB04-US_EN.fm
Screw (M4×6) (included)
Screw (M3×4) (included)
4
Adjust the mounting position of the display.
• The available adjustment positions of the Display differ depending on
the front-back/up-down/angle positions. Consult "Position Adjustment
and Mounting Dimensions of the Display" (page 17) for details.
1) Hold the Display up vertically, remove the 4 flush head
screws (M4×13) on the left and right sides for up-down
adjustment, and adjust the up-down position of the display.
Flush head screw (M4×13)
(left and right)
ALPINE iLX-F411/iLX-F409 M3514702010 (EN)